The "Remotio" telecontrol module
is a device with a series of analogue inputs and outputs to
collect information from flowmeters, chlorine and level measuring
devices, meters, power failure and opening/closing sensors...and
sends it to a control centre to manage it. Moreover, the unit
has a number of different digital outputs, which enable it
to send and run different orders from the control centre to
the remote points.
> Communication by means of WiFi, UHF radio or GSM/GPRS.
> Possibility of backup communication.
> Running of irrigation programs stored in memory.
> Management and storage of alarms and events
> Storage of historic figures for managed elements.
> Communication with the control centre to receive irrigation
instructions, configurations or to transmit stored data.
> Autonomous operation.
> Low consumption.
> Real time clock.
> Connection with external equipment: PDA, laptop…
> Remote configuration and updating.
Technical specifications:
> 3 optocoupled intensity analogue inputs.
> 14 digital inputs.
> 16 digital outputs to relay (action on 8 electrovalves).
> 1 RS232 serial communication port.
> Communication by means of 3 technologies: WiFi, UHF radio
or GSM/GPRS.
> 1 removable SIM-holder tray to insert the GSM/GPRS card
for the operator required
> 2 SMA antenna connections: - GSM/GPRS - Dual Radio- WiFi
> 12V supply. (10v-16v) through an external source (transformer
or battery).
> Low consumption (approx. 2mA).
Datasheet
